PD600DSP+Dante Amplifier Module
![\"PD600DSP+DANTE.png\"/](\"/tp_project/Uploads/ueditor/image/20191028/1572247037596049.png\" "\\"1572247037596049.png\\"")
Feature:
·Intelligent control Class D amplifier
·Cooling by heatsink without fan
·SMPS power supply
Specifications:
PD600DSP+Dante | |
POWER RATE (RMS at 1% THD at 230Vac) | 250w+150w/8ohm 500w+100w/4ohm 2ohm stable |
Frequency response | 20Hz-20KHz |
| Input Sensitivity | 1.0V |
Working voltage | 85v-265v with PFC |
S/N Ratio | >80dB |
Amplifier Gain | 26dB |
Daming factor | >550(8ohm load,1Khz or below) |
THD+N(typical) | <0.1(20Hz-2oKHz8ohm load) |
Input and output | 1x XLR Male,1x XLR Female 1x Volume ,1x PRESET USB for DSP,Dante |
DSP | 1input/3output 96Khz sample Rate fixed point DSP Phase,All past filter,12EQ,800ms delay Crossover,Limiter Driver free |
WIFI(Ethernet by TCP/IP) | Selectable |
Power input | Powercon Switch |
Power consumption | 9w |
| Metal Chassis | Selectable |
Dimension(HxWxDcm) | 114x80x325mm |
weight | 1.3Kg |
