Feature:
Intelligent control class D amplifier
Cooling by aluminum panel without fan
SMPS power supply
| Model: | PA4200DSP-B |
| Power Ratings(RMS@1%THD@230Vac) | 2x400W+1500W/8ohm |
| Power Ratings(RMS@1%THD@230Vac) | 2x800W+2500W/4ohm |
| Frequency Response: | 20Hz-20KHz(±3dB) |
| Input Sensitivity: | 2.2V |
| Input Impedance: | 20KΩ/10KΩ |
| Amplifier Gain | 32dB |
| Damping Factor: | >1000(8ohm load,1KHz or below) |
| Signal To Noise-Ratio: | >120dB |
| THD+N(typical): | <0.06(20Hz-20KHz 8ohm load) |
| Working Voltage: | 85-265V,with PFC |
| Power Consumption: | 25W |
| Input and Output Connector: | 2xXLR combo female,1xXLR male 2xSpeakon NL4,1xRCA,3xVolume 1xpreset,USB ,RS-485,Ethernet |
| DSP: | 2 input 4 output 48KHz sample rate, 24bit ADC/DAC and 48bit TI DSP Phase,All past filter,12 EQ, Crossover,Limiter Driver free APP for IOS/Androi(new version) Ethernet by TCP/IP |
| WIFI(Ethernet by TCP/IP): | selectable |
| Dante: | selectable |
| Metal Chassis: | selectable |
| Dimensions(WxDxH): | 300x100x400mm |
| Weight: | 5kg |
